Main Content

Miscellaneous Products

Warton offer a range of products to assist with your soldering requirements.

This includes temporary solder masks, and waxlets.

If you can't find what you are looking for, or if you require further information please contact us.

Solrist Solder Spot Resist

Solrist Peelable Spot Resist is a temporary solder resist designed to be applied on areas of printed circuit assemblies which require components to be added after wave soldering. A thin layer of Solrist is applied over holes and easily removed after drying through the soldering process. Solrist is non staining and is available in viscosity's suitable for both manual and automated dispensing.

Kapton Tape & Dots

Kapton® is a registered Trade Mark of DuPont™

Kapton® Tape and Dots are based on DuPont™ Kapton® film. Kapton® is backed with a clear silicone pressure sensitive adhesive and has been successfully used at temperatures up to 400°C and only begins to char at 800°C. These properties result in a low static polyimide tape with remarkable dimensional stability and excellent electrical and physical properties over a wide range of temperatures (-8°C to +370°C).

Waxlets

Where the pump shaft enters the molten solder surface on many wave soldering machines, a fine powdery dross is likely to form. Waxlets are used to prevent this dross build formation.

The Company warrants only that the Goods will correspond as to the quality and description with the Company’s own specifications as set out in each product data sheet and all other terms conditions or warranties relating to the quality and/ or fitness for any particular purpose whether express or implied are excluded to the fullest extent permitted by law. It is therefore the Buyers responsibility to satisfy itself by inspection and testing of samples prior to placing any orders as to the purpose for which he requires the Goods and or particular conditions of use that will apply to the Goods and or the suitability or performance of the Goods when used in combination with any other Goods or materials, in any specific environment and in any process. In no event shall the Company be responsible for special, incidental or consequential damages, whether the claim is in contract, negligence or otherwise.